The qualities of responsibility and environmental sustainability in industrial production are a green hope for the future of all of us. Contributing to the process of recycling materials and a production method that respects the environment and keeps it clean is also possible in the production and moulding of technopolymers.
All the S•CAB production is made with 100% recyclable materials as their individual components can quickly be sorted for disposal. Every plastic element has the identification mark according to ISO11469:2001, and provides easy directions for recycling. All materials used by S•CAB for its production are of first quality.

Plastics

S•CAB uses techno-polymers with ideal characteristics to manufacture its products, polymeric materials that ensure sturdiness, stability, non-toxicity, resistance to atmospheric agents including mould, dust and smog, and resistance to UV rays. All our techno-polymers are 100% recyclable in full respect for the environment. For cleaning use neutral liquid soap diluted in water. Clean with a soft damp cloth to avoid scratches, by all means refrain from using abrasive sponges. Do not use abrasive or chlorine-based products, or solvents in general such as alcohol, benzine, acetone, trichloroethylene, ammonia etc., because these substances tarnish plastic surfaces.

Metals | Steel

S•CAB pays the utmost attention to mechanical strength and to the high quality of the steel used in the manufacture of its products. To clean steel or coated metal surfaces, use only a soft damp cloth. Do not use abrasive creams or metal-cleaning pastes, and avoid the use of solvents. Never use abrasive sponges or metal scouring pads. Regular cleaning is recommended to remove salt residue or deposits, helping to preserve the finish over time.

Metals | Aluminium

Aluminium combines lightness with exceptional strength. Its surface is anodised or polyester powder-coated for enhanced corrosion resistance. To clean aluminium surfaces, use only a soft cloth dampened with water and mild soap, then dry thoroughly to prevent streaking. Do not use abrasive creams or metal-cleaning pastes, and avoid solvents or aggressive detergents that could damage the finish. Never use abrasive sponges or metal scouring pads. Regular cleaning is recommended to remove salt residue or deposits, helping to preserve the finish over time.

Concrete bases

Care and maintenance
For daily cleaning, use a household sponge dampened with water and a neutral detergent. Rinse thoroughly and dry with a soft cloth. Avoid using abrasive sponges or other tools that could scratch the surface. Do not use harsh chemicals that could damage the concrete’s water-repellent treatment, which, however, does not guarantee that the product is completely waterproof. By nature, concrete is a porous, absorbent material. If the product comes into contact with liquids such as wine, drinks, oil, spirits or similar substances, it is advisable to act promptly by IMMEDIATELY removing the liquid and cleaning the item as outlined above.

Handling
Manoeuvre the bases with care during handling, positioning or assembly operations. Impacts or undue stress may cause chipping or damage.

Wood

S•CAB furniture items with wooden shell and/or Frame are manufactured in compliance with European standards, with full respect for the environment. For cleaning use only a soft suiting damp cloth and warm water and dry immediately with a soft, dry suiting. Do not use abrasive or aggressive products, chlorine based products and solvents in general. (ammonia, bleach or cleaning products containing acid). Immediately mop up any spilt liquids with a clean dry cloth, wood does not stand the humidity. Do not expose to direct sunlight. Do not expose to sources of heat. Wood is a natural material and shall be subject to change color when exposed to sunlight. Wood is a natural raw material; this means that you cannot guarantee the homogeneity and uniformity of synthetic materials. Even elements made from the same plant may show colour differences. Colour variations or imperfections, due to the fibres or veins of wood, are a guarantee of the quality of solid wood and constitute its uniqueness. The colours of our woods are water-based, to respect the environment and health.

Fabrics

For instructions on how to clean fabrics, please refer to the specific data sheet and the label on the product. For everyday cleaning do not brush, but vacuum clean regularly, avoiding applying pressure to the fabric. For light stains, use a soft damp brush, using if necessary mild detergents or white vinegar diluted in a lot of water. Do not use abrasive products or detergents or solvents. Do not use high pressure steam washers.

Simil-leather

For everyday cleaning use a soft, damped cloth. For more stubborn dirt, use a soft sponge with water and soap. Do not use abrasive products or detergents or solvents for cleaning. Immediately mop up any spilt liquids with a clean dry cloth. Some dyes for clothing and accessories (e.g., jeans) may migrate to the light colours of this item. This phenomenon increases with humidity and temperature. We take no responsibility for colour transfer caused by external contaminants.

OUTDOOR CUSHIONS

Maintenance and cleaning

We recommend always following the instructions on the technical data sheets of the individual fabric and on any labels attached.
We suggest regularly cleaning the fabrics to maintain their appearance and prolong their life.
We recommend gentle daily cleaning with a vacuum cleaner to remove dust.
Dry liquids as soon as possible with a white absorbent cloth.
For light stains it is important to act quickly using a soft damp brush or a white cloth, using delicate detergents if needed.
Before use, always evaluate the effectiveness of detergents on small, hidden parts. Do not use abrasive products, concentrates, solvents, or bleaches.
The above advice does not guarantee complete removal of stains.
The acrylic fabric cushions are suitable for outdoor use. During use, we still recommend protecting the cushions from bad weather with the appropriate protective sheets and avoiding prolonged exposure to the elements.
Before storing the product for the season of non-use, make sure that it is dry and clean and that it is stored in a dry and ventilated place, to prevent the formation of moisture condensation.
All fabrics may undergo a natural colour change following exposure to the sun and/or prolonged use, this is a normal effect and cannot be considered a defect.
All fabrics may have slight natural colour differences compared to the sample, these are normal effects and cannot be considered defects.

Nautical rope

Cleaning
Periodically remove any dust using a damp cloth and/or a soft-bristled brush.
Dip a sponge or a soft-bristled brush into a solution of mild detergent and lukewarm water, and gently wipe the rope while applying light pressure, so as to avoid damaging the rope fibres.
Rinse to remove all soap/detergent residue and leave to air dry.
Avoid the use of harsh chemicals and steam.

Maintenance
Avoid prolonged exposure to the elements. The textile components may undergo a natural colour change as a result of excessive exposure to sunlight and/or prolonged use; this is a normal effect and shall not be considered a defect.

Storage
Before storing the product during periods of non-use, ensure that it is dry and clean and that it is kept in a dry, well-ventilated place in order to prevent the formation of condensate and/or dampness.

Elastic straps

The elastic straps made from polypropylene and synthetic rubber are designed for outdoor use and guarantee lasting strength and durability.

Maintenance and cleaning
Remove dust with a low-power vacuum cleaner. Alternatively, clean with a slightly damp sponge or soft-bristled brush, using non-abrasive neutral detergents. Rinse with clean water and leave to air-dry.
Warnings: avoid aggressive products, solvents, abrasive sponges, and high-pressure water jets.
Regular cleaning helps maintain elasticity and appearance over time.

OUTDOOR RUG

Maintenance and cleaning

Rug hand-woven on manual looms using synthetic fibre yarn. Normal cleaning: vacuum cleaner without brushes. Deeper cleaning: solution of cold water and mild soap. No abrasive brushes, bleaching agents or solvents. No professional dry cleaning. No high pressure washer. In case of stains – pat the area with a clean cloth.

Lay flat to dry.

HPL and Fenix compact laminate table tops

HPL and Fenix compact laminates are panels made up of several layers of cellulose fibre material, impregnated with thermosetting resins. They have excellent mechanical, physical, hygiene, and resistance qualities.

Maintenance

For cleaning, use a neutral liquid soap diluted in water. Clean with a soft, damp cloth to avoid scratches. Always finish by rinsing with lukewarm water and dry with a soft, clean cloth to avoid lime deposits. Do not leave the tops wet for long and dry any spilled liquids. Do not use abrasive or aggressive products, or abrasive sponges or brushes.
The material may be subject to variations due to changing climatic and thermal conditions, it is therefore possible that alignment differences may arise.
For more information on Fenix tops: https://www.fenixforinteriors.com/en-GB/materials/fenix

Cork

Cork is a 100% eco-friendly, natural, and recycled material; it is soft, elastic, insulating, with fire retardant properties, and can be used both outside (using the same precautions and the same maintenance as wooden products) and inside.
The material is a wooden essence and lightens in the sun, as its natural feature.
For cleaning, use a damp, non-abrasive cloth. Do not use aggressive products because the material absorbs and it could damage it.

Laminated wood tops

Maintenance and cleaning

For cleaning use a liquid neutral soap diluted in water. Clean with a soft damp cloth to prevent scratches. Do not use abrasive or aggressive products (ammonia, bleach or cleaning products containing acid).
DRY THE TABLE TOP AFTER CLEANING OR IN CASE OF DROPPING LIQUIDS.
THE LAMINATED WOOD TOP DOES NOT STAND THE HUMIDITY.